Welcome to ruihui's website

Website
www.ruihui.net www.cn-ruihui.com www.ruihuimachinery.com
  1. English
  2. |

Company Profile Enterprise honor Development history

Automation Nc Servo Straightener Feeder and Uncoiler Machine

MAC4-900HSL

  • Material Width70-900(mm)
  • Material Thickness0.6-6.0(mm)
  • Speed16-24(m/min)
  1. Detail Information


Specification:
Model MAC4-600HSL MAC4-800HSL MAC4-900HSL MAC4-1000HSL
Stock Width(mm) 70~600 70~800 70~900 70~1300
Stock Thickness(mm) 0.6~6.0 0.6~6.0 0.6~6.0 0.6~6.0
Max.Coil Weight(kg) 5000 5000 7000 7000
Max.Coil O.D.(mm) 1400 1400 1400 1400
Coil I.D.(mm) 508 508 508 508
Feed Length(mm) ~500* ~500* ~500* ~500*
Max.Line Speed(m/min) 16~24 16~24 16~24 16~24
Work Roll Number(piece) upper 6/lower 5 upper 6/lower 5 upper 6/lower 5 upper 6/lower 5
Feed Roll number(set) 1 1 1 1
Main Motor AC15.0 AC15.0 AC15.0 AC15.0
Mandrel Expansion Hydrauilc Hydrauilc Hydrauilc Hydrauilc
Reel Motor(kw) 2.2 2.2 3.7 7.5
Power(v) 3 Phase 220V/380V/50HZ
Operating Air(Mpa) 0.49 0.49 0.49 0.49
*In Case Feeding length is 500mm or longer,MASTER CONTROL Funolion(Option)must be provideo.

Straigtening Performance:
Model MAC4-600HSL MAC4-800HSL MAC4-900HSL MAC4-1000HSL
Stock Thickness
(mm)
0.6 600 800 900 1000
1.4 600 800 900 1000
1.8 600 800 900 1000
2.0 600 800 900 1000
2.5 550 800 800 900
3.0 460 605 605 605
4.0 300 350 350 350
5.0 175 200 200 200
6.0 175 150 150 150
*The above flgures are the material having yield strength of 600N/mm2 max.
 

SHOW PRODUCT 

 

PRODUCT INTRODUCTION:


Decoiler straightener feeder is in the short space design were especially developed to meet the needs of customers with not enough space. They offer process reliability even for the most demanding materials. They are optimally suited for the manufacture of structural parts as well as for processing of high-strength materials - even for the higher ranges of strip thickness.
By combination of straightener and roll feed into one machine, so called feeder-straightener, which is positioned directly at the press, the needed space for material loop of straightened material can be saved.

Machine characteristics:
1. The pressure arm adopts pneumatic pressure to prevent loose coil materials, and is equipped with a guide device to lift materials to the feeding port, and feed the materials With the plate, the material head will be pressed flat, so that the material smoothly into the body.
2, the feeding and discharging using variable screw and two hands input separate adjustment, make the material accurate.
3. The leveling roller adopts upper 6/5 and lower 5, all of which are made of high-strength rolling bearing steel GCr15. The hardness of the surface is up to HRC60 ~ 62 with the dimension accuracy of 0.01mm.
4. The feeding motor adopts Japanese high-torque yaskawa servo motor, equipped with a complete set of mitsubishi PLC control system and 7-inch weilun touch screen, which is easy to operate and highly automatic.
5. The material on the material rack is controlled by the photoelectric control at the bottom. The NC feeder can flatten at the same time and send the material with preset feeding length to the punch press die.
6. The operation of each auxiliary device is powered by air or electricity. It is simple to operate and easy to maintain.
 

WE PROMISE 


●RUIHUI not only produces high quality products, but also provides perfect after-sales service, timely solve difficult problems of customers.
☆ free pre-sales service: machine tool selection, process plan and other services.
☆ free to provide installation, debugging, training and other services.
☆ maintenance response time: arrive at the maintenance site within 12-24 hours after receiving the guarantee notice.
☆ maintenance speed: ensure that 90% of the fault machine can be repaired within 2 hours after the maintenance technicians arrived at the maintenance site (including replacement).
☆ maintenance period: the first year (12 months) for free maintenance period.
☆ maintenance period after the maintenance service: replacement parts only charge cost, to open, fair, fair principle service customers.
☆ regularly follow up the customer use of equipment, guidance to solve some practical problems in production, and the general manager appointed director of the maintenance department, supervision of maintenance service quality.
☆ regularly provide customers with industry information.

● warm tips:
At present, the press equipment manufacturing industry is popular to outsource a large number of machine tool parts to save costs, while lihao company invests a large number of advanced processing equipment and always insists on producing all important parts by itself.
Control the quality, reliability and effectiveness of the product to the greatest extent, and pass these benefits on to the end user.
 

COMPANY INTRODUCTION


GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.: professional design and production automation punch surrounding equipment: u manipulator, servo feeder, feeding servo feeder, feeder, high-speed roller tape feeder, servo swing feeder, triad servo feeder, combined rack straightening machine, straightening machine, precision leveling machine, plate straightening machine, material, light material, heavy material frame, double material frame, the disc material frame automation modification such as punch. (note: any model can be customized according to customer requirements)
Our products are widely used in home appliances, automobiles, hardware, electronics and other fields. The company vigorously expand marketing network, subordinate affairs
In the pearl river delta, the Yangtze river delta region; In order to actively expand overseas markets, the department of overseas trade has been established, and its products are exported to North America, Middle East, southeast Asia, European Union and other countries.
The company always adhere to the "customer respect, quality honor, continuous improvement, striving for innovation" business policy, serious deepening of internal management, is the company steadily based on the market.